Basic knowledge:

• WiFiG25
  • Getting started with WiFiG25 Board
• How to enter the System Command Line
  • Using the SSH session via USB Cable Connect
  • Using the SSH session via WiFi Connect
  • Using Serial Terminal Emulator via Debug Serial Port
• Wire example

How-tos:

• Install RNDIS driver for Windows system
• Configure the WiFi connection
• Discover the IP address assigned by DHCP

Programming languages

This is a selection of "Hello World !" examples in all the languages we tried on the WiFiG25 boards:

• Hello World in C

Linux Kernel 3.6.9 and Buildroot

• Download the source code
• Linux Kernel image: Compiling the Linux Kernel 3.6.9 for the WiFiG25/CORE9G25
• Rootfs: Build an Embedded Buildroot root filesystem

Update the system image file:

• Recovery the Pre-install System by SD card
• Update the system image by Micro SD card
• System Image Repository

Embedded peripherals

• GPIO lines
• UART: RS232/RS422/RS485
• SPI bus interface
• I2C bus interface
• 1-wire lines
• A/D converter lines
• CORE9G25/WiFiG25 wiring examples

USB peripherals

• Wi-Fi USB adapters
• USB to 4 serial port adapter module
• USB to Ethernet module

Programming examples

• Programming examples with c
• Install the ARM9 cross toolchain to compile the Linux Kernel and AT91Bootstrap
• Hello world example from a Linux Device driver