The NET-SAM9X25 Single Board Computer is a high-performance controller board. It is designed based on the CM-SAM9X25 processor card which integrates an AT91SAM9X25 microcontroller, 128MByte DDR2 SDRAM, 256MByte Nand Flash, 4Kbit EEPROM, UART, Ethernet, USB HOST, on board. It is connected with NET-SAM9X25 expansion board through two 100pin B-T-B expansion interfaces.
CoreWind also offers a complete software development package to customers. The board supports linux 2.6.39 operating system and is provided with complete basic drivers which enable a quick channel to evaluate the Atmel AT91SAM9X25 processor and customize application software. It would be an ideal development platform for multimedia and communication applications.
HardWare
CPU Board:CM-SAM9X25
Dimensions: 57*39mm, 8 layerWorking Temperature: -40 to +85 CelsiusAtmel AT91SAM9X25 ARM926EJ-S Core Microprocessor128MByte DDR2 RAM, 256MByte Flash, 4kbit EEPROMTwo 100Pin connector extend more functionExpand two Ethernet, Two CAN Bus, Serial portSoftware Modem,USB Host/Device, SDIO, TWI, SPI
Mechanical Parameters
Dimensions:115*74mmPower Input Voltage: 12VTemperature Range: -40 ℃ ~ 85 ℃Humidity Range: 20% ~ 90%
Data Transfer Interface
Serial port
DEBUG: One 3-wire TTL Debug serial port(provide TTL_RS232 module)
COM0: One 5-wire TTL serial port, Support extend RS232/RS485 Module
Ethernet: Two 10/100Mbps Ethernet port (RJ45) USB port:
Two High-speed USB 2.0 Host port, 480Mbps
One High-speed USB 2.0 Device port, 480Mbps
TF card slot: One TF card interface(Hot plug-and-play) Zigbee interfaceSoft Modem interfaceExpansion Interface
J1:3 x Uart, 1 x SPI, 4 x GPIO
J3: 6 x AD, 4 x PWM, 1 x Uart
J4: 6 x IO, 1 x USB, 1 Soft Modem
J5: JTAG, 2 x SPI, 1 x SSC, 1 x TWI
Input Interface
1 LED: 1 x Power LED
2 Button: 1 x Reset KEY, 1 User Key
微博
