This tutorial illustrates how to Update the system image(bootstrap, u-boot.bin. linux kernel and rootfs) by USB Disk.
Prepare
- Connect the Serial port to the PC(refer to the chapter "Debug Serial Port Interface")
- Confirm the CORE9X25 can boot the U-boot(if it can't boot the U-boot, please Recovery the pre-install System by SD card)
Step-by-step guide
1. Prepare the USB Disk, Copy your system image file(only copy the file you want to update) to the USB Disk, you can download the system image from here(China Mirror| USA Mirror):
Configure file: corewind.ini bootstarp file: Linux/at91sam9x5ek-nandflashboot-uboot-3.5.3.bin U-boot file: Linux/u-boot.bin DTS file: Linux/at91sam9x25ek.dtb Linux kernel: Linux/uImage File system: Linux/ubifs.img
please confirm the file name is the same that you copy it to the USB Disk, only copy the image that your want to update, don't need copy all the file.
If you use the 256MB DDR2 RAM version, you should rename the at91sam9x5ek-nandflashboot-uboot-256M-3.5.3.bin to at91sam9x5ek-nandflashboot-uboot-3.5.3.bin, or rename the u-boot-256M.bin to u-boot.bin.
2. Insert the USB Disk to the CORE9Xx5-CON board.
3. Power on the board, then the board will update the system auto, when the Terminal print the follow info, it means update system success.
### Update OK ### Please RESET the board ###
4. Remove the USB disk, and power on the board again.
微博
