Python example

This is a basic example on how to use a serial port in Pyhon using the pySerial module:

import serial
 
ser = serial.Serial(
    port='/dev/ttyS1', 
    baudrate=9600, 
    timeout=1,
    parity=serial.PARITY_NONE,
    stopbits=serial.STOPBITS_ONE,
    bytesize=serial.EIGHTBITS
)  
 
ser.write("A")      # Send a "A" char to the serial port
s = ser.read(1)         # Wait for a char
print s
ser.close()

C example

This is a basic example on how to use a serial port in C.

Refer to these links to understand how it works.

• Termios
• GNU Low-level I/O doc

#include "stdio.h"     
#include "string.h"    
#include "unistd.h"    
#include "fcntl.h"     
#include "errno.h"     
#include "sys/types.h"
#include "sys/stat.h"
#include "stdlib.h"
#include "stdarg.h"
#include "termios.h"
 
int main(void) {
    char txBuffer[10];
    char rxBuffer[10];
    int fd;
    struct termios tty_attributes;
 
    if ((fd = open("/dev/ttyS1",O_RDWR|O_NOCTTY|O_NONBLOCK))<0) {
        fprintf (stderr,"Open error on %s\n", strerror(errno));
        exit(EXIT_FAILURE);
    } else {
        tcgetattr(fd,&tty_attributes);
 
        // c_cflag
        // Enable receiver
        tty_attributes.c_cflag |= CREAD;        
 
        // 8 data bit
        tty_attributes.c_cflag |= CS8;          
 
        // c_iflag
        // Ignore framing errors and parity errors. 
        tty_attributes.c_iflag |= IGNPAR;       
 
        // c_lflag
        // DISABLE canonical mode.
        // Disables the special characters EOF, EOL, EOL2, 
        // ERASE, KILL, LNEXT, REPRINT, STATUS, and WERASE, and buffers by lines.
 
        // DISABLE this: Echo input characters.
        tty_attributes.c_lflag &= ~(ICANON);     
 
        tty_attributes.c_lflag &= ~(ECHO);      
 
        // DISABLE this: If ICANON is also set, the ERASE character erases the preceding input  
        // character, and WERASE erases the preceding word.
        tty_attributes.c_lflag &= ~(ECHOE);     
 
        // DISABLE this: When any of the characters INTR, QUIT, SUSP, or DSUSP are received, generate the corresponding signal. 
        tty_attributes.c_lflag &= ~(ISIG);      
 
        // Minimum number of characters for non-canonical read.
        tty_attributes.c_cc[VMIN]=1;            
 
        // Timeout in deciseconds for non-canonical read.
        tty_attributes.c_cc[VTIME]=0;           
 
        // Set the baud rate
        cfsetospeed(&tty_attributes,B9600);     
        cfsetispeed(&tty_attributes,B9600);
 
        tcsetattr(fd, TCSANOW, &tty_attributes);
 
        txBuffer[0]='A';
        write(fd,txBuffer,1);
 
        // Read a char
        if (read(fd,&rxBuffer,1)==1) {
            printf("%c",rxBuffer[0]);
            printf("\n");
        }   
    }   
 
    close(fd);  
    return EXIT_SUCCESS;
}

Related links